Linkedin-in Facebook-f Instagram Youtube
EMEC - Emec Favicon 1
EMEC dosing pumps and water treatment systems
HEADQUARTER
Default
EMEC - Info
Contact Us
EMEC - Dosy
Dosy

Emec

Headquarter

/ headquarter map /

Mechanical Division

The quality of a system begins with the precision of every single component.

 

In the EMEC Mechanical Division, CNC machining, injection moulding, automation and dimensional inspection enable many of the mechanical and plastic components used in EMEC dosing pumps and systems to be manufactured in-house.

 

Direct control over the entire production process helps maintain high standards of precision, reliability and consistency, turning more than 40 years of experience into increasingly advanced manufacturing capabilities.

Discover our operating locations Headquarter:

EMEC - Mechanical Division

MECHANICAL DIVISION

EMEC - Electronic Division

ELECTRONIC DIVISION

EMEC - Assembly Area

ASSEMBLY & OPERATIONS

EMEC - Mech 1
3
Control Lathes

Control Lathes

Key components for EMEC electromagnetic pumps are manufactured using precision machining, including the metal magnets produced in-house.
2
Magnet Cycle, 465 Series

Magnet Cycle, 465 Series

A strategic production phase for manufacturing the magnets used in electromagnetic pumps. In-house production allows for direct control over quality and final performance.
4
BMX Block

BMX Block

Machinery designed for the machining of components such as bushings, handwheels, and agitator shafts. Precision and control ensure reliability even in the most demanding applications.
5
Macchina Engel 6

Macchina Engel 6

One of the injection molding machines used to produce plastic components for EMEC products. From small technical parts to controller housings, everything is manufactured through highly controlled processes.
1
Tool Area

Tool Area

The heart of the production process. This is where the tools and equipment needed for subsequent operations are prepared, ensuring operational continuity and precision in the manufacturing process.
arrow legend
1 Tool Area
2 Magnet Cycle, 465 Series
3 Control Lathes
4 BMX Block
5 Macchina Engel 6
EMEC - Mech 2
4
BMX Block

BMX Block

Machinery designed for the machining of components such as bushings, handwheels, and agitator shafts. Precision and control ensure reliability even in the most demanding applications.
5
Macchina Engel 6

Macchina Engel 6

One of the injection molding machines used to produce plastic components for EMEC products. From small technical parts to controller housings, everything is manufactured through highly controlled processes.
6
Bagging Machine

Bagging Machine

Automated packaging line for components and spare parts. Valves, filters, and accessories are prepared and packaged to ensure consistent availability and quality.
7
Automated Assembly of Fuel Injection Filters

Automated Assembly of Fuel Injection Filters

An automated system that assembles, packages, and identifies each component using a QR code. This process improves traceability, efficiency, and control throughout the entire supply chain.
arrow legend
4 BMX Block
5 Macchina Engel 6
6 Bagging Machine
7 Automated Assembly of Fuel Injection Filters
EMEC - Mechanical 3
8
Measurement Center

Measurement Center

A laboratory dedicated to dimensional inspections of components. Random inspections ensure compliance with design tolerances and EMEC quality standards.
2
Magnet Cycle, 465 Series

Magnet Cycle, 465 Series

A strategic production phase for manufacturing the magnets used in electromagnetic pumps. In-house production allows for direct control over quality and final performance.
1
Tool Area

Tool Area

The heart of the production process. This is where the tools and equipment needed for subsequent operations are prepared, ensuring operational continuity and precision in the manufacturing process.
arrow legend
2 Magnet Cycle, 465 Series
8 Measurement Center
1 Tool Area

/ headquarter map /

Electronic Division

This is where research, electronics and automation bring intelligence to EMEC systems.

In the Electronic Division, every stage is developed and controlled in-house: from component management and electronic board production to automated testing and the assembly of customised panels and systems.

Advanced technologies and specialist expertise enable EMEC to develop precise, reliable and cutting-edge solutions designed to meet the diverse requirements of water treatment and chemical dosing applications.

Discover our operating locations Headquarter:

EMEC - Mechanical Division

MECHANICAL DIVISION

EMEC - Electronic Division

ELECTRONIC DIVISION

EMEC - Assembly Area

ASSEMBLY & OPERATIONS

EMEC - ELECTRONIC 1
6
SMT Line

SMT Line

The heart of EMEC's electronics manufacturing. Here, components are automatically placed and soldered onto circuit boards with a high degree of precision and repeatability.
5
Skid

Skid

An area dedicated to the assembly of custom plug-and-play dosing systems. Each skid is configured according to the customer’s specific application requirements.
3
Panels

Panels

A department dedicated to the manufacture of ready-to-install dosing and control panels. Solutions designed to simplify integration and reduce startup time.
4
SUN PM-VF Datasheets

SUN PM-VF Datasheets

During this phase, the assembly and soldering of the second side of the circuit boards are completed. The circuit boards are then finished and prepared for testing.
2
PEF Assembly

PEF Assembly

This is where the probe holders and sensor devices used in EMEC control systems are assembled. These components are essential for ensuring precision and continuous monitoring.
1
Probe Testing

Probe Testing

Testing and calibration of EMEC probes to ensure precision, reliability and accurate measurement in every operating condition.
arrow legend
1 Probe Testing
2 PEF Assembly
3 Panels
4 SUN PM-VF Datasheets
5 Skid
6 SMT Line
EMEC - ELECTRONIC 2
7
Electronic Components Warehouse

Electronic Components Warehouse

An automated storage and picking system that handles thousands of electronic components. A solution that speeds up order fulfillment and improves inventory management.
1
Probe Testing

Probe Testing

Testing and calibration of EMEC probes to ensure precision, reliability and accurate measurement in every operating condition.
4
SUN PM-VF Datasheets

SUN PM-VF Datasheets

During this phase, the assembly and soldering of the second side of the circuit boards are completed. The circuit boards are then finished and prepared for testing.
arrow legend
1 Probe Testing
4 SUN PM-VF Datasheets
7 Electronic Components Warehouse
EMEC - ELECTRONIC 3
4
SUN PM-VF Datasheets

SUN PM-VF Datasheets

During this phase, the assembly and soldering of the second side of the circuit boards are completed. The circuit boards are then finished and prepared for testing.
6
SMT Line

SMT Line

The heart of EMEC's electronics manufacturing. Here, components are automatically placed and soldered onto circuit boards with a high degree of precision and repeatability.
8
Exhibition Space

Exhibition Space

An exhibition space that showcases the variety of electronic components developed and used by EMEC, highlighting the level of technological integration found in the company's products
9
Anthropomorphic arm

Anthropomorphic arm

A robotic system designed for the automatic testing of electronic circuit boards. Each cycle verifies that the circuit boards are functioning properly before they are integrated into the final products.
arrow legend
4 SUN PM-VF Datasheets
6 SMT Line
8 Exhibition Space
9 Anthropomorphic arm

/ headquarter map /

Assembly Area

This is where expertise, technology and control come together to create solutions for water treatment and chemical dosing.

 

In the EMEC Assembly Area, high-productivity lines and workstations dedicated to more complex configurations guide each product through an organised and controlled process: from assembly and testing to identification, packaging and shipping.

 

A flexible and efficient production system in which every stage is managed in-house to ensure quality, reliability and full traceability.

Discover our operating locations Headquarter:

EMEC - Mechanical Division

MECHANICAL DIVISION

EMEC - Electronic Division

ELECTRONIC DIVISION

EMEC - Assembly Area

ASSEMBLY & OPERATIONS

EMEC - ASSEMBLY 1
3
Assembly Line 1

Assembly Line 1

EMEC's high-productivity line, designed to handle high production volumes with speed and precision. This is where most of the metering pumps destined for markets around the world are manufactured.
2
Assembly Line 2

Assembly Line 2

A production line dedicated to more complex and customized projects, where each workstation handles tasks with higher added value. Flexibility and expertise enable us to create configurations tailored to our customers' needs.
1
Testing Phase

Testing Phase

Every EMEC product undergoes comprehensive testing before shipment. Step-by-step procedures and functional tests ensure quality, reliability, and compliance with company standards.
arrow legend
1 Testing Phase
2 Assembly Line 2
3 Assembly Line 1
EMEC - ASSEMBLY 2
4
Warehouse

Warehouse

After testing, the product is finalized and prepared for packaging. This step ensures that every pump leaves the production line ready for safe transport and installation.
arrow legend
4 Warehouse
EMEC - ASSEMBLY 3
5
Product Discontinuation

Product Discontinuation

After testing, the product is finalized and prepared for packaging. This step ensures that every pump leaves the production line ready for safe transport and installation.
6
Label Application

Label Application

Each unit is assigned a unique identifier, along with technical information and traceability data. This is an essential step in ensuring product monitoring, support, and management over time.
7
Printing Center and Plotter Services

Printing Center and Plotter Services

Here, panels, custom graphics, and components for systems and skids are manufactured in-house. This department combines technological precision with the ability to respond quickly to customer requests.
8
Conveyor belt exit

Conveyor belt exit

The finished product automatically moves on to the final stages of the process. This system is designed to optimize production flows and reduce internal handling times.
arrow legend
5 Product Discontinuation
6 Label Application
7 Printing Center and Plotter Services
8 Conveyor belt exit
EMEC - ASSEMBLY 4
10
Cardboard Box Maker

Cardboard Box Maker

The automated packaging process ensures speed, protection, and consistency. The packaging, designed in-house by EMEC, protects the products throughout the entire supply chain.
9
Packaging and Shipping

Packaging and Shipping

The final stage of the production process. The products are prepared, protected, and organized so they can reach customers and distributors around the world efficiently and safely.
11
Prototyping

Prototyping

The place where ideas become products. This is where new components and solutions are developed and tested, supporting the continuous innovation that defines EMEC.
arrow legend
9 Packaging and Shipping
10 Cardboard Box Maker
11 Prototyping

/ video corporate /

EMEC - DSC 0057

Inside EMEC

One ecosystem of expertise, technology and people.

This video takes you inside EMEC, exploring its different areas and divisions and offering a closer look at the spaces, processes and expertise that turn research, production and innovation into reliable solutions for water treatment.

more info

Anything else
you’d like to know?

Tell us what you need. Our team is ready to provide more information about EMEC, our products and the solutions best suited to your application.

EMEC - Raggruppa 2370
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.